Yamaha FZS6W Service Manual page 269

• Install shift fork-C into the groove in the 3rd
and 4th pinion gear on the main axle.
3. Install:
• Shift fork-R "1"
• Shift fork-L "2"
• Drive axle "3"
• Shift fork guide bar
• Shift drum retainer
Shift drum retainer bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
LOCTITE®
NOTE:
• Install shift fork-L into the groove in the 6th
wheel gear and shift fork-R into the groove in
the 5th wheel gear on the drive axle.
• Make sure that the drive axle bearing circlip
"a" is inserted into the grooves in the upper
crankcase.
4. Check:
• Transmission
Rough movement → Repair.
NOTE:
Oil each gear, shaft, and bearing thoroughly.
5-80
TRANSMISSION