Panmobil SCANNDY User Manual page 6

No. Description
1 Left LED indicator
2 Right LED indicator
3 OLED display
4 Basic trigger key
5 Navigation key's
6 Clear key
7 OK and power key
8 Red laser protect
window
9 Product label
10 Battery cover release
button
11 Battery cover
12 Main RS232 interface
Function
Indicates green light when power ON
red light when charging the battery
Indicates green light when triggered to read barcode
blue light when a Bluetooth connection is established
128x64 full graphic display
Trigger for the internal laser engine to read 1D barcodes
In menu mode the UP or DOWN navigation key is used to
highlight the chosen option.
LEFT navigation key to SELECT the highlighted option.
RIGHT navigation key to go one step back to the previous option
menu.
In edit mode the navigation keys are used to move the cursor UP,
DOWN, LEFT or RIGHT.
In edit mode this key is used to delete the last character input
when pressed once.
Holding this key pressed for 2 seconds does clear the complete
row.
On G7KLOBTCL1 Version this key is used to clear the screen.
When the device is switched OFF, press this key shortly to power
the device ON. If the device is already powered ON, press and
hold this key for 3 seconds to power the device OFF
In message mode press this key shortly to apply a message.
In edit mode press this key shortly to have a Linefeed
Protects the laser engine against dust and damage
Keep this window clean to insure scan barcodes
Find here the device serial number
Press this button and pull the battery cover in direction of
interface connector to access the battery
Do not use the basic device without the battery cover.
COM1 RS232C interface for data transfer and battery charging
when the device is placed in it's cradle or a cable is directly
connected.
Do not connect with power supply directly.
Only recharge via cradle on serial-interface cable.
SCANNDY USER GUIDE
Page 5