Operating The Scanndy Unit - Panmobil SCANNDY User Manual

6.

OPERATING THE SCANNDY UNIT

After the battery is fully charged according to the description in the previous chapter,
the SCANNDY unit is now ready to operate.
To switch ON the SCANNDY unit press the OK/power key for one second.
When the system boots up you can hear a beep melody.
Once the SCANNDY is successfully powered ON it automatically starts to establish a Bluetooth
connection to the last connected device. While the connection procedure is running.
You can see the following screen
If Bluetooth connects successfully, the Bluetooth LED indicator shows blue light which indicates
that a Bluetooth connection is established. The Bluetooth LED shows blue light as long as the
devices are connected. The SCANNDY unit is now ready to scan barcode and shows the following
screen.
If the Bluetooth connection fails, you can hear an alarm beep and the SCANNDY unit will show a
message on the screen as follows
Bluetooth connection
please wait....
Read Barcode
Bluetooth connection
failed!
SCANNDY USER GUIDE
Page 11