Panmobil SCANNDY User Manual page 18

To set up symbology specific options, highlight the symbology you want to set up and press the
LEFT navigation key (SELECT) to enter the symbology setup menu.
To change the current setting of the symbology option, highlight the option and press the LEFT
navigation key to change the value. The current setting is marked with "*"
You can leave each menu by pressing the RIGHT navigation key (BACK). Changed values will be
stored automatically into the non volatile memory of the device .
SELECT
Full Code39:OFF
Enable Chk:OFF
Send Chk bit:OFF
Send star:ON
Set code length
SELECT
ON
*OFF
SCANNDY USER GUIDE
Page 17