Page 2
PANMOBIL to determine any such changes have been made. The information in this publication does not represent a commitment on the part of PANMOBIL.
CAUTION Any changes or modifications made to this device that are not expressly approved by advanced PANMOBIL Systems GmbH & Co. KG may void the user’s authority to operate this equipment. NOTE To maintain compliance with FCC rules and regulations, cables connected to this device must be shielded cables, in which the cable shield wire(s) have been grounded to the connector shell.
SET UP PREAMBLE CHARACTERS ..............19 SET UP BLUETOOTH OPTIONS................21 BLUETOOTH ACCESS KEY SETUP ..............24 SET THE BLUETOOTH DEVICE NAME ..............26 SET UP THE SERIAL SCANNDY INTERFACE ............27 7.10 SETUP OLED DISPLAY FUNCTIONS ..............28 7.11 SET UP POWER OPTION ..................
PRODUCT DESCRIPTION SCANNDY Version 1 This version of SCANNDY contains main features like integrated laser-barcode scanner, 168x64 OLED display, integrated Bluetooth Class I communication module and a 19 key rubber keypad. 1.1 MAIN UNIT FRONT VIEW REAR VIEW BOTTOM VIEW...
Page 6
COM1 RS232C interface for data transfer and battery charging when the device is placed in it’s cradle or a cable is directly connected. Do not connect with power supply directly. Only recharge via cradle on serial-interface cable. SCANNDY USER GUIDE Page 5...
For communication between SCANNDY unit and cradle there are two methods available. To send or receive data trough the RS232 connector in the cradle, just place the SCANNDY unit into the cradle. For wireless communication the cradle unit is also available with an internal Bluetooth Class I module.
GUN-GRIP OPTION In addition to the ergonomic and compact design of the SCANNDYbasic unit PANMOBIL provides a robust gun-grip option. To connect the basic unit to the gun-grip, simply remove the basic battery cover, take out the basic battery and plug the gun-grip to the basic unit.
GUN CRADLE FOR SCANNDY To provide the user with the same performance and flexibility which gives the SCANNDYbasic cradle unit, PANMOBIL offers a special made gun cradle which is designed to use with SCANNDYgun type unit. The gun type cradle unit provides the same features as the basic type cradle unit like flexible cable connections via RS232 cable, Keyboard Wedge cable, USB cable or Ethernet connection.
Page 10
Liquid discharge Helps liquids to get out of gun slot. hole Power input jack Power input from power supply Cable interface Cable insert for host communication RS232 cable Keyboard Wedge cable USB cable Ethernet cable SCANNDY USER GUIDE Page 9...
USB Cable The cradle unit is now ready to operate. Before start working with the SCANNDY unit please charge the battery for at least 8 hours to make sure the battery is fully charged and provides it’s best performance.
The SCANNDY unit is now ready to scan barcode and shows the following screen. Read Barcode If the Bluetooth connection fails, you can hear an alarm beep and the SCANNDY unit will show a message on the screen as follows Bluetooth connection...
Page 13
Now you have to establish a new Bluetooth connection by reading the serial barcode at the backside of the cradle. If the scanned barcode is a valid serial number, the SCANNDY unit starts the Bluetooth connection procedure again and you will see the following screen Bluetooth connection please wait….
SYSTEM SETUP OF SCANNDY UNIT All major system settings can be made on the SCANNDY unit itself. To access the system setup menu please press the LEFT navigation key. You will see the following screen SELECT Run Program Date Time...
LEFT navigation key to set the date format. SELECT Back Year.Month.Day Month.Day.Year Day.Month.Year To set the time format please highlight the “Time Format” option in the “Date/Time” menu and press the LEFT navigation key to set the time format. SCANNDY USER GUIDE Page 14...
Page 16
SELECT Back 24 Hour am/pm format As soon as the LEFT key is pressed, the changed values are stored into the non-volatile memory of the device. SCANNDY USER GUIDE Page 15...
7.3 OPTION BARCODE The system software of SCANNDY decodes all major barcode symbologies including Code 39, Code 39 with full ASCII, Code128, Codabar, EAN, UPC, Code 93, Int 2of5, Standard 2of5, Matrix 2of5, ISBN/ISSN and Chinese 2of5. To set up barcode specific option highlight the BARCODE option in the system menu and press the LEFT navigation key to enter the barcode option menu.
Page 18
The current setting is marked with “*” SELECT *OFF You can leave each menu by pressing the RIGHT navigation key (BACK). Changed values will be stored automatically into the non volatile memory of the device . SCANNDY USER GUIDE Page 17...
Selecting the option “Terminator” from the barcode menu, allows you to set the terminator character which will be send after each barcode. SELECT Back None CR/LF … To set up a terminator please highlight the terminator you need and press the LEFT navigation key to select. SCANNDY USER GUIDE Page 18...
To set up postamble characters please key in the characters you need by using the key pad. Press the OK key to save. NOTE: Input of preamble and postamble characters is only available on SCANNDY unit with 19 key rubber keypad. SCANNDY USER GUIDE...
Page 21
Barcode data Postamble Terminator Term./Post. Preamble Barcode data Terminator Postamble SELECT Back *Post./Term. Term./Post. To select the format you need, please highlight the format and press the LEFT navigation key (SELECT) to set up the format. SCANNDY USER GUIDE Page 20...
SET UP BLUETOOTH OPTIONS On SCANNDY units with built-in Bluetooth module you can set up the necessary Bluetooth settings in the system setup menu. SELECT Back Run Program Date Time Barcode Bluetooth Serial Display Power Security Reset device To set up the Bluetooth options, please highlight the Bluetooth option in the system setup menu and press the LEFT navigation key (SELECT) to enter the Bluetooth setup menu.
Page 23
If the last connected device is within the Bluetooth range, the connection will be established after few seconds. As soon as the devices have successfully connected, the blue LED on SCANNDY unit will indicate blue light as long as the devices are connected.
Page 24
Back Conn Last Dev Search Dev The SCANNDY unite will than search the Bluetooth neighborhood for available devices and show a list with device name on the screen where you can select the device you want to connect to. SELECT...
7.7 BLUETOOTH ACCESS KEY SETUP To protect the SCANNDY unit from unauthorized connection, you can set up an access key. If an other Bluetooth device wants to connect to the SCANNDY unit, the other device will be prompt to input the access key. If the access key send by the other device does not match with the SCANNDY access key, it is not possible for the other device to establish the connection.
Page 26
*Enable Pin Disable Pin Please highlight the settings you want to set and press the LEFT navigation key to select. NOTE Disabling the security settings enables other Bluetooth devices to connect to your device unconditionally! SCANNDY USER GUIDE Page 25...
Back Set Device Name Device228 Enter the new device name by using the SCANNDY keypad and press the OK key to save the new device name. NOTE Changing the device name is only possible on SCANNDY units with 19 key keypad.
7.9 SET UP THE SERIAL SCANNDY INTERFACE To view or change the serial interface settings please highlight the “Serial” option from the system menu and press the LEFT navigation key to enter the serial menu. SELECT Run Program Date Time...
SELECT Back Set contrast Set normal Dir Set reverse Dir To set the contrast please highlight the “Set contrast” option and press the LEFT navigation key to enter the contrast setting. SELECT Back Sample Text SCANNDY USER GUIDE Page 28...
Page 30
Set normal Dir Set reverse Dir In order to make it possible for users to read the screen on various usage of the SCANNDY device, the screen directions can be changed. Highlight the “Set normal Dir” option from the display menu to set the screen direction to standard direction when using the SCANNDY as a hand unit.
7.11 SET UP POWER OPTION In order to save battery power when the device is not used or idle, user can set the SCANNDY unit to automatically power off if idle for specified time. SELECT Run Program Date Time Barcode...
To abort this action please press either the RIGHT navigation key or press the “C” key. As factory default the password is empty please press the OK key as password! If the password input is correct, you will be prompted to enter the new password. New Password: SCANNDY USER GUIDE Page 31...
Page 33
Now input the new password by using the SCANNDY key pad. If you want to leave the password empty like in factory default, just press the OK key. Else input the password you want and press the OK key to accept the new password.
7.13 RESET DEVICE TO FACTORY DEFAULT If you are not sure what set up options you have changed in your SCANNDY device, you can select the “Reset device” option from system menu. SELECT Run Program Date Time Barcode Bluetooth Serial...