Reset Device To Factory Default - Panmobil SCANNDY User Manual

7.13

RESET DEVICE TO FACTORY DEFAULT

If you are not sure what set up options you have changed in your SCANNDY device, you can select
the "Reset device" option from system menu.
To reset the SCANNDY unit to factory default settings, please highlight the "Reset device" option
and press the LEFT navigation key to proceed the system reset.
Before the reset procedure will be started you will be noticed on the effect the RESET function
has.
ATTENTION!
Please be clear that all settings and all data saved in the device will be lost after you accept the
reset function
If you are sure you want to reset the device to factory default, please accept the message by
pressing the OK key. After few seconds, the device is set back to default.
To abort the reset function, please press the "C" key.
SELECT
Run Program
Date Time
Barcode
Bluetooth
Serial
Display
Power
Security
Reset device
Back
All data and Setting
Will be lost after
Reset!
Press OK to reset
SCANNDY USER GUIDE
Page 33