Kyocera FS-3040MFP+ Service Manual page 77

Item No.
U632 Setting the CNG detection times in the fax/telephone auto select mode
Sets the CNG detection times in the fax/telephone auto select mode.
1. Select the setting using the cursor up/down keys.
Display
1TIME
2TIMES
* : Initial setting: 2TIMES
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U633 Setting communication control 4
Description
Makes settings for fax transmission regarding the communication.
Purpose
To reduce transmission errors when a low quality line is used.
Method
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Display
V.34
V.34-3429Hz
DIS 2RES
RTN CHECK
Enabling/disabling V.34 communication
Sets whether V.34 communication is enabled/disabled for transmission and reception.
1. Select the setting using the cursor up/down keys.
Display
ON
TX
RX
OFF
* : Initial setting: ON
2. Press the start key. The setting is set.
Description
Description
Detects CNG once.
Detects CNG twice.
Description
Enables or disables V.34 communication.
Sets the V.34 symbol speed (3429 Hz).
Sets the number of times of DIS signal reception.
Sets the reference for RTN signal output.
Description
V.34 communication is enabled for both transmission and reception.
V.34 communication is enabled for transmission only.
V.34 communication is enabled for reception only.
V.34 communication is disabled for both transmission and reception.
1-3-49
2MF/2MG