Kyocera FS-3040MFP+ Service Manual page 16

Item
Scanning system
Photoconductor
Image write system
Charging system
Developing system
Transfer system
Separation system
Cleaning system
Charge erasing system
Fusing system
CPU
Memory Standard
Maximum
Interface
Resolution
Operating Temperature 10 to 32.5 °C/50 to 90.5 °F
environment
Humidity
Altitude
Brightness
Dimensions (W × D× H)
Weight
Space Space required
(W × D)
Power source
Options
3 in 1 model (without FAX)
Flat bed scanning by CCD image sensor
a-Si drum (diameter 30 mm)
Semiconductor laser (1 beam)
Contact charger roller method (positive charging)
Mono component dry developing method
Toner replenishing: Automatic from the toner container
Transfer roller (negative-charged)
Small diameter separation, discharger brush (negative-charged)
Counter blade cleaning + cleaning roller
Exposure by eraser lamp (LED)
Heat roller system
Heat source: halogen heater
Abnormally high temperature protection devices: thermostat
PowerPC440 (667MHz)
256MB
768MB
USB: 1 port (Hi-speed USB 2.0)
USB host: 1 port
Ethernet: 1 port (10BASE-T/100BASE-TX)
600×600 dpi
15 to 80%
2,500 m/8,202 ft maximum
1,500 lux maximum
494 × 497.1 × 545.5 mm
19 7/16" × 19 9/16" × 21 1/2"
Approx. 25.5 kg / 56.2 lb
(with toner container)
Without MP tray: 494 × 497.1 mm
19 7/16" × 19 9/16"
With MP tray : 494 × 656.1 mm
19 7/16" × 25 13/16"
120 V AC, 60 Hz, more than 10.0 A
220 - 240 V AC, 50/60 Hz, more than 6.0A
Paper feeder × 3, Expanded memory
1-1-2
Specifications
4 in 1 model (with FAX)
Approx. 25.8 kg / 56.9 lb
(with toner container)
2MF/2MG