Honeywell ADEMCO VISTA-48A Installation And Setup Manual page 57

9 0 D i s p O p t i o n
1
A l a r m I D : 0 0 0
T r o u b l e I D : 0 0 0
Display Options
0 = no display
1 = display only
2 = chime only
3 = chime & disp.
[∗] to continue
Contact ID Report Codes
000-999 = report code
[∗] to continue; returns to Enter
configurable zone type number
prompt.
Select whether faults on zones assigned to this zone type are
displayed at the keypad and/or cause a chime sound.
Enter the desired 3-digit Contact ID report codes for faults and
troubles occurring on zones assigned to this zone type.
IMPORTANT: Make sure the code does not conflict with existing,
predefined Contact ID report codes. See the System
Communication section for a list of standard Contact ID codes.
5-17