Adjusting The Image And Focus - Honeywell HD273H User Manual

23
Remove the protection film softly after the installation is
complete. Leaving the film on the bubble during installation will
protect it from scratches during the installation process.

Adjusting the Image and Focus

Steps:
3-axis surveillance angle adjustment (refer to Figure 1-16 while
adjusting the angle):
•
View the camera image with the connected monitor.
•
Rotate the panning table to adjust the pan direction
[0°~355°].
•
Loosen the tilting lock screw.
•
Rotate the tilting table to adjust the tilt direction [0°~90°].
•
Tighten the tilting lock screw.
•
Rotate the camera [0°~355°] to adjust the lens to the
optimum surveillance angle.
HD273H(X) Minidome Camera User Guide
800-18606 – A – 06/2014