Honeywell HD273H User Manual page 35

35
Figure 1-26 Setting a Detection Area
Steps:
1. Set the STATUS as ON to enable the motion detection area.
2. Move the cursor to COLOR, and select a color for the area's
border.
3. Move the cursor to HORIZON SIZE and move the joystick
left/right to define the horizontal size of the selected motion
area.
4. Move the cursor to VERTICAL SIZE and move the joystick
left/right to define the vertical size of the selected area.
5. Move the cursor to HORIZON MOVE and move the joystick
left/right to define the horizontal position of the selected
area.
6. Move the cursor to VERTICAL MOVE and move the
joystick left/right to define the vertical position of the
selected area.
HD273H(X) Minidome Camera User Guide
AREA
1. STATUS
2. COLOR
3. HORIZON SIZE
4. VERTICAL SIZE
5. HORIZON MOVE
6. VERTICAL MOVE
7. RETURN
OFF
WHITE
0

0
0
0

800-18606 – A – 06/2014