Computer Input; Input Source Selection; Computer 2(Analog)) - Sanyo PLC-XC56 Owner's Manual

Computer Input

Input Source Selection (RGB: Computer 1/Computer 2(Analog))
Direct Operation
Choose either Computer 1(RGB) or Computer 1(Scart) or Computer 2(Analog) by pressing the INPUT button
on the top control or press the COMPUTER 1 button or Computer 2 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
When Computer 1 is selected, press the Point
3
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
press the SELECT button.
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.45).
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPUTER 2 button
Computer 2 (PC digital)
Computer 2 (AV HDCP)
Computer 2 (Analog)
buttons to select Input and
or the SELECT button.
buttons to select Computer 1.
Top Control
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
INPUT button
(AV HDCP) /
Input Menu
Computer
1
(Analog)
Video
S-video
RGB(PC digital)
NTSC
RGB(PC digital)
27