Installation; Positioning The Projector; Adjustable Feet - Sanyo PLC-XC56 Owner's Manual

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (max)
Zoom (min)

Adjustable Feet

Projection angle can be adjusted up to 10.0 degrees with
the adjustable feet.
1 Lift the front of the projector and press the feet lock
latches on both side of the projector.
Release the feet lock latches to lock the adjustable feet
2
and rotate the adjustable feet to a proper height and tilt.
To retract the adjustable feet, lift the front of the projector
3
and push and undo the feet lock latches.
Keystone distortion of the projected image can be
corrected with the remote control or menu operation.
(pp.23, 45-46)
41.8' (12.7 m)
34.8' (10.6 m)
23.2' (7.1 m)
17.4' (5.3 m)
11.6' (3.5 m)
4.6' (1.4 m)
40"
813 x 610 2032 x 1524
4.6' (1.4 m) 11.6' (3.5 m)
5.5' (1.7 m) 13.9' (4.2 m)
100" 150"
3048 x 2286
17.4' (5.3 m)
20.9' (6.4 m)
Adjustable Feet
200" 300"
4064 x 3048 6096 x 4572
23.2' (7.1 m)
34.8' (10.6 m)
27.8' (8.5 m)
41.8' (12.7 m)
Feet Lock Latches
13