Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XC56 Owner's Manual

Video Input

Direct Operation
Choose Video or S-video by pressing the INPUT button on
the top control or the VIDEO button or the S-video button on
the remote control.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
S-video and then press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.45).

Input Source Selection (Video, S-video)

buttons to select Input and
the SELECT button.
or
buttons to select either Video or
Top Control
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
INPUT button
Remote Control
VIDEO button
S-VIDEO button
Input Menu
(AV HDCP) /
(Analog)
Video
S-video
Video
S-video
RGB(PC digital)
37