Connecting To A Computer - Sanyo PLC-XC56 Owner's Manual

Installation

Connecting to a Computer

Cables used for connection
• VGA Cable (Mini D-sub 15 pin) *
• DVI-VGA Cable
• DVI Cable
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
Monitor Output
VGA
cable
Audio cable
(stereo)
COMPUTER IN 1
/COMPONENT IN
Note:
• Input sound to the COMPUTER1 /COMPONENT AUDIO IN
terminals when using the COMPUTER IN 1/ COMPONENT IN
and the COMPUTER IN 2/DVI-Iterminals as input.
• When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
• When input RGB(PC digital) source to the MONITOR OUT
terminal, the MONITOR OUT terminal is not available.
14
Monitor Input Monitor Output
VGA
DVI
cable
cable
MONITOR COMPUTER
OUT IN 2/ DVI-I
COMPUTER 1
/COMPONENT
/COMPUTER 2
AUDIO IN
DVI -VGA
cable
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)