Indicators And Projector Condition - Sanyo PLC-XC56 Owner's Manual

Appendix
Check the indicators for projector condition.
The projector is operating normally.
Indicators
WARNING
POWER
TEMP.
red/green
red
green
blinking fast red
blinking fast green
green
Fig.1 Filter replacement icon and "Please wait..."
The projector is detecting abnormal condition.
Indicators
WARNING
POWER
TEMP.
red/green
red
green
blinking fast red
blinking fast red
• • • green / orange / yellow
• • • blinking fast
(approx. 0.5 seconds ON, 0.5 seconds OFF)
72

Indicators and Projector Condition

WARNING LAMP
FILTER REPLACE
orange yellow
WARNING LAMP
FILTER REPLACE
orange yellow
• • • off
Projector Condition
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the POWER
ON/STAND-BY button to turn on the projector.
The projector is operating normally.
The projector is preparing for stand-by or the projection
lamp is being cooling down. The projector cannot be
turned on until cooling is completed.
The projector is in the Power management mode.
The filter is scrolled using the Filter control function in the
setting menu.
When the filter is being scrolled, the Filter replacement
icon and "Please wait..." message (Fig. 1) appear on the
screen for about 30 seconds.
Projector Condition
The temperature inside the projector is elevated close to
the abnormally high level.
The temperature inside the projector is abnormally high.
The projector cannot be turned on. When the projector
is cooled down enough and the temperature returns to
normal, the POWER indicator lights red and the projector
can be turned on. (The WARNING TEMP. indicator keeps
blinking.) Check and replace the filter.
• • • red
• • • blinking slow
(approx. 2 seconds ON, 2 seconds OFF)