Lexus CT200h Owner's Manual page 278

2-4. Using other driving systems
Setting up Lexus parking assist-sensor (vehicles with navigation
system)
You can change the warning beep volume and navigation system
screen operating conditions.
STEP 1
Press the "MENU" button on the Remote Touch.
STEP 2
Select "Setup" on the "Menu" screen.
STEP 3
Select "Vehicle" on the "Setup" screen.
STEP 4
Select "LEXUS park assist" on the "Vehicle settings"
screen.

The Lexus parking assist-sensor can be operated when

Front corner sensors:
• The "POWER" switch is in ON mode.
• The shift position is in other than P.
• The vehicle speed is less than about 10 km/h (6 mph).

Rear corner and center sensors:
• The "POWER" switch is in ON mode.
• The shift position is in R.
278
CT200h_OM_OM76067E_(EE)
Alert volume setting
Display on/off
Alert distance setting
Make sure to save after chang-
ing settings.