Lexus CT200h Owner's Manual page 202

2-1. Driving procedures

If the "READY" indicator does not come on
If the "READY" indicator does not come on when you press the "POWER"
switch with the shift position in P and the brake pedal depressed, contact
any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional immediately.

If the hybrid system is malfunctioning
P. 573

If the electronic key battery is depleted
P. 527

Operation of the "POWER" switch

When operating the "POWER" switch, one short, firm press is enough.
If the switch is pressed improperly, the hybrid system may not start or
the "POWER" switch mode may not change. It is not necessary to press
and hold the switch.

If attempting to restart the hybrid system immediately after turning the
"POWER" switch off, the hybrid system may not start in some cases.
After turning the "POWER" switch off, please wait a few seconds before
restarting the hybrid system.

Automatically P position selection function
P. 213

When the P position control system malfunctions
The "POWER" switch will not be able to be turned off. In such a case, the
switch can be turned off after applying the parking brake.
Have the vehicle inspected by any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional immediately.
202
CT200h_OM_OM76067E_(EE)