Lexus CT200h Owner's Manual page 199

STEP 4
Check that the "READY" indicator is on.
If the "READY" indicator changes from a flashing light to a
solid light and the buzzer sounds, the hybrid system is starting
normally.
The vehicle will not move when the "READY" indicator is
off.
The vehicle can move when the "READY" indicator is on
even if the engine is stopped. (The gasoline engine starts or
stops automatically in accordance with the state of the vehi-
cle.)

Stopping the hybrid system
STEP 1
Stop the vehicle completely.
STEP 2
Set the parking brake. (P. 217)
STEP 3
Shift the shift position to P. (P. 210)
Check that the shift position indicator shows P. (P. 207)
STEP 4
Press the "POWER" switch.
The hybrid system will stop, and the meter display will be
extinguished (the shift position indicator will be extinguished
a few seconds after the meter display)
CT200h_OM_OM76067E_(EE)
2-1. Driving procedures
2
199