Lexus CT200h Owner's Manual page 103

Linking driving position memory with door unlock operation
(driver's seat only)
Record your driving position to button 1, 2 or 3 before performing
the following:
Carry only the key (including the card key) to which you want to
link the driving position. If 2 or more keys are in the vehicle, the
driving position cannot be linked properly.
STEP 1
Close the driver's door and turn the "POWER" switch to
OFF mode.
STEP 2
To prevent unintended triggering of the alarm, open and close a
door once after a driving position has been recorded. (If a door is
not opened within 30 seconds after door lock switch is pressed, the
doors will be locked again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm.
(P. 143)
CT200h_OM_OM76067E_(EE)
1-4. Adjustable components (seats, mirrors, steering wheel)
Press the desired button (1, 2 or
3) to recall the position. Then,
while keep pressing the button,
press the driver's door lock
switches (either lock or unlock)
until the signal beeps.
The driving position is recalled
when the driver's door is
unlocked using the entry func-
tion or wireless remote control
and the driver's door is opened.
1
103