Lexus CT200h Owner's Manual page 121


Mirror angle can be adjusted when
The "POWER" switch is in ACCESSORY or ON mode.

Linked mirror function when reversing (vehicles with driving position
memory)
When the mirror select switch is in the "L" or "R" position, the outside rear
view mirrors will automatically angle downwards when the vehicle is
reversing in order to give a better view of the ground. To disable this func-
tion, move the mirror select switch to the neutral position (between "L" and
"R").

Rain clearing mirrors (if equipped)
When water droplets collects on the mirror surface, for example when it
rains, the rain clearing (hydrophilic) effect of the mirrors causes the droplets
to be spread out into a film making the rear view clearer. In the following
cases, the rain clearing effect will be reduced temporarily, but will return
after 1 or 2 days' exposure to direct sunlight.

After wiping dirt off the mirrors

When the mirrors fog up

After waxing your vehicle in an automatic car wash

After your vehicle has been parked for a long period in underground
parking lots etc. where there is no direct sunlight

When the mirrors are fogged up
The outside rear view mirrors can be cleared using the mirror defoggers.
Turn on the rear window defogger to turn on the outside rear view mirror
defoggers.
(P. 329)

Automatic adjustment of the mirror angle (vehicles with driving position
memory)
A desired mirror face angle can be entered to memory and recalled automat-
ically by the driving position memory. (P. 102)
CT200h_OM_OM76067E_(EE)
1-4. Adjustable components (seats, mirrors, steering wheel)
1
121