Lexus CT200h Owner's Manual page 125


When the power window does not close normally
If the jam protection function is operating abnormally and a window cannot
be closed, perform the following operations using the power window switch
on the relevant door.

After stopping the vehicle, the window can be closed by holding the
power window switch in the one-touch closing position while the
"POWER" switch is turned to ON mode.

If the window still cannot be closed even by carrying out the operation
explained above, initialize the function by performing the following pro-
cedure.
STEP 1
Hold the power window switch in the one-touch closing position.
Continue holding the switch for a further 6 seconds after the win-
dow has closed.
STEP 2
Hold the power window switch in the one-touch opening position.
Continue holding the switch for a further 2 seconds after the win-
dow has opened completely.
STEP 3
Hold the power window switch in the one-touch closing position
once again. Continue holding the switch for a further 2 seconds
after the window has closed.
If you release the switch while the window is moving, start again from the
beginning.
If the window continues to close but then re-open slightly even after per-
forming the above procedure correctly, have the vehicle inspected by any
authorized Lexus dealer or repairer, or another duly qualified and equipped
professional.
CT200h_OM_OM76067E_(EE)
1-5. Opening and closing the windows and moon roof
1
125