Lengthening The Line; Operating Instructions; Checking The Charge; Charging Procedure - Yardworks 060-2273-4 Instruction Manual

12
model no. 060-2273-4 | contact us: 1 866 523 5218

Lengthening the Line

While the grass trimmer is operating, the
cutting line gets worn down and
becomes shorter. This trimmer is
equipped with Automatic Line
Advancement, which automatically
feeds additional line to the
correct length as it wears down.
If the line does not automatically
advance, the trimmer line may be
tangled or empty.
To advance the line, restart the trimmer.
Upon starting, the line will automatically
advance.
model no. 060-2273-4 | contact us: 1 866 523 5218

Operating instructions

Trimmer Tips

Checking the Charge

If the battery pack does not charge properly:
• Check the current at the power outlet with another tool.
Make sure that the outlet is not turned off.

Charging Procedure

1. Plug the charger into an AC power outlet.
2. Insert the battery pack into the charger,make sure the latch and battery are fully
inserted into the charger.
3. When the battery is charging the LED light is blinking GREEN, when the battery is
fulled charged, the led will stop blinking green and becomes a solid green light.
Do not dspose of the battery(ies) in a fire. The cell may explode. Check with local codes for
possible special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
WARNING! If the battery is inserted into the charger when
!
warm or hot, the CHECK BATTERY indicator light may
switch on. If this occurs allow the battery to cool outside of
the charger for 30 minutes.
• Recharge the battery pack anytime you notice there is
less power.
• Disconnect the charger from the AC power outlet when
not in use and once battery has reached a full charge.
13