Canon EOS Rebel XT Instruction Manual page 91

Ii!il3ml
Auto Exposure Bracketing (AEB)
*
Canceling A.EB
f$
Follow steps 1 and 2 to set the AEB
amount to
<,.IIm
o
MPi>.
@
AEB will also be canceled
automatically if you turn the power
switch to <
OFF
>,
change lenses,
obtain flash-ready, replace the
battery, or replace the CF card.
o
AEB cannot be used with flash or bulb exposures.
[l]
If the drive mode is set to continuous
(~),
the three bracketed shots will
be taken continuously and then the shooting will stop automatically. If the
drive mode is set to single image (0), you must press the shutter button
three times.
If the self-timer/remote control has been set, the three bracketed shots
will be taken continuously.
If C.Fn-7
[Mirror lockup]
is set to
[1:Enabled]
(p.150), the drive mode
for AEB will be single even if it is set to continuous.
AEB can be combined with exposure compensation.
91