Canon EOS Rebel XT Instruction Manual page 134

m
Direct Printing with Bubble Jet Direct
Start printing.
Press the <
Jr..T
> key to select [Print],
then press <
@
>.
The printing will start.
When the printing ends, the screen
will return to step 1.
To stop the printing, press <
@>
while
[Stop] is displayed, then select [OK]
and press
<@>.
o
If [Borders] is set, the date might be imprinted on the border, depending on
the printer.
[]]
If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
If you select [Stop] during the printing, the printing will stop and the
paper will be discharged.
If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Select [Stop] or [Continue]. If you select
[Continue] and the printer does not resume printing, it will resume
automatically after you resolve the problem.
If you are using a BJ printer equipped with an operation display panel,
the error No. will be displayed if an error occurs. To resolve the respective
error, refer to the BJ printer's instruction manual.
134