Isgus Perfect 2040 Operating Manual page 38

Key S áSkipñ
® In the programming mode this key serves to sequentially skip from
the current programming field to the next field. However, for the "S"
key to perform this function, the user must have programmed all
values in the current field.
® In the normal operating mode, this key serves to delete cards from
the time recorder's memory (if the function Card Close Out is
enables)
4-6 Getting Started
Program display
® Line 1 = program field
® Line 2. = program value
The flashing character(s) is the
active value being programmed.
Chapter 4