Isgus Perfect 2040 Operating Manual page 116

not rounded original punching time is printed
Date
(printed)
25.11.02 AM 7:30
26.11.02 AM 8:01
27.11.02 AM 8:06
28.11.02 AM 8:07
rounded punching time is printed
Date
(not printed)
25.11.02 AM 7:30
26.11.02 AM 8:01
27.11.02 AM 8:06
28.11.02 AM 8:07
Hint
In order to use this function for punch pairs, where the first IN-
punch is rounded up to a time after the date change, the IN-
punch rounding schedule must also be defined beyond the date
change.
In the input routine possible time settings for the following day
are automatically marked with "+" in the 12 hours mode as well
as in the 24 hours mode (see the following example)
Example B: Time range on Monday:
Grace:
Rounding time:
Hint
If IN-punches on Tuesday in the time range AM 00:00 to
AM 00:22 should be rounded to AM 00:15, it is necessary to
enter a corresponding time schedule for Tuesday.
Factory setting:
4-84 Getting Started
IN IN
(rounded and
not printed)
AM 8:00
AM 8:00
AM 8:00
AM 8:07
IN IN
(rounded and not
printed)
AM 8:00
AM 8:00
AM 8:00
AM 8:07
® function deactivated
Chapter 4
OUT Total
PM 12:00 4.00
PM 12:00 8.00
PM 12:00 12.00
PM 12:00 15:53
OUT Total
PM 12:00 4.00
PM 12:00 8.00
PM 12:00 12.00
PM 12:00 15:53
from = PM 11:30
07 minutes
= time range end minus grace
= AM + 00:22 - 00.07 = AM + 00:15
to = AM + 00:22