Isgus Perfect 2040 Operating Manual page 29

2. Check the connection of the power
cord to the screw-type terminal strip
of the CPU.
3. Connect the power cable of the power supply unit to the bottom side of your
PERFECT.
Fig. 10: Bottom side of the recorder with power cable socket
4. Insert the plug-in power supply unit into the provided socket.
Attention
The power cord must be connected to the PC board
terminals that are electrically compatible with the supply
voltage of the electrical outlet that the power cord is plugged
into. Incorrect connections can cause the destruction of the
time recorder!
Warning!
The power outlet must be close to the recorder and easily
accessible. Make sure, that a loose power cable does not
cause obstruction or risk to people.
Chapter 3
black
black
Installation 3-9