Isgus Perfect 2040 Operating Manual page 154

5-20 Operation
Hint: The function or the display message remains active
for about 5 seconds. If no card is inserted during this time
the message will revert to the display prompt requesting
you to enter the card number of the lost or damaged time
card.
The time recorder checks whether the new card already
exists memory.
If the new time card does exist in the time recorder's
memory, it rejects the card with the message
When the recorder accepts the time card, the new card
number is saved and the total is carried over to the new
time card number.
The time card record with the old card number is deleted
automatically.
Hint: No values are printed out on the new card. The
recorder returns the card immediately.
5. Remove the new card.
The recorder displays the parameter "CREATE CARD".
6. Now you can choose to reproduce additional time cards or
quit the programming routine.
Scroll through programming routine until
the date and time are displayed again.
Chapter 5
CARD BEING USED
(key "S")