Server Chassis Features; System Power; Sata Subsystem; Control Panel - Supero SUPERSERVER 6016TT-TF User Manual

Hide thumbs Also See for SUPERSERVER 6016TT-TF:
Table of Contents

Advertisement

1-3

Server Chassis Features

The following is a general outline of the main features of the SC808T-1200B 1U
chassis. Details on the chassis can be found in Chapter 6.

System Power

When confi gured as a SuperServer 6016TT-TF/6016TT-IBXF/6016TT-IBQF, the
SC808T-1200B includes a single high-effi ciency (Gold Level) 1200W cold-swap
power supply, which provides the power to both serverboards housed in the chas-
sis.

SATA Subsystem

The SC808T-1200B chassis was designed to support four SATA hard drives, which
are hot-swappable units.

Control Panel

The SC808T-1200B features two independant control panels associated with each
node (serverboard). Each control panel has LEDs to indicate power on, network
activity, hard disk drive activity and system overheat conditions. Each control panel
also includes a main power button and a system reset button.

Rear I/O Panel

The SC808T-1200B is a 1U rackmount chassis. Its I/O panel provides a slots for
two low-profi le PCI-E x16 expansion cards, two COM ports, four USB ports, two
VGA ports and four Gb Ethernet ports. See Chapter 6 for details.

Cooling System

The SC808T-1200B chassis has an innovative cooling design that features an air
shroud and three sets of 4-cm counter-rotating fans per node (confi gured as six
fans placed back to back in pairs). A fan speed control setting in BIOS allows fan
speed to be determined by system temperature.
Chapter 1: Introduction
1-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 6016tt-ibxfSuperserver 6016tt-ibqf

Table of Contents