Talking To Your Colleague With Discreet Calling (Not For Hipath 500); Automatic Connection Setup (Hotline); Assigning A Station Number (Not For U.s.) - Siemens HiPath 500 Operating Instructions Manual

Enhanced phone functions
Step by Step
)945
*41=Temporary MSN?
42
Talking to your colleague with discreet cal-
ling (not for HiPath 500)
If this function has been configured (ask your service
personnel), you can join an ongoing call conducted by
an internal user at a system telephone with display.
You can listen in unnoticed and speak to the internal
user without being overheard by the other party
(discreet calling).
^
Lift the handset.
Enter the code.
j
Enter your internal station number.
Your service personnel can protect your telepho-
ne against discreet calling.

Automatic connection setup (hotline)

If this function is configured (contact your service per-
sonnel), the system automatically sets up a connection
to a preset internal or external destination.
^
Lift the handset.
Depending on the setting, the connection is either set
up immediately or only after a preset period of time
(hotline after a timeout).

Assigning a station number (not for U.S.)

If this function has been configured (contact your ser-
vice personnel), you can selectively assign a specific
number (DID number) to your telephone before making
an external call. The assigned number then appears on
the called party's display.
N
Press the key shown.
Select and confirm the option shown.
j
Enter the DID number you wish to use.
j
Dial the external number.