Amplicomms PowerTel M7000 Operating Instructions Manual page 23

between ◄ and ► press Clear until you find the first
letters are OK, then press Select, then continue by
typing the next letter key, if this is incorrect use the
option bar at the bottom of the screen which should
have appeared, showing individual letters and charac-
ters then press choose a letter and press Select.
Repeat this procedure for the next letter if necessary.
If you still cannot get the correct word, Long press
button and you can temporarily toggle the input
method from Smart ABC/abc to plain ABC/abc.
NOTE: If you wish to include a numeric character you
can do this by pressing and holding the appropriate
numeric key down for 3 seconds.
- In order to enter text in Multitap mode, press the key
labelled with the corresponding letter/character. If the
first character of the group is required, press the key
once. If the second character is required, press it
twice, and so on. To enter two characters assigned to
(See page 69 for costs and hours of operation)
Helpline 0844 800 6503
U
SING THE PHONE
21 21