AeroWorks YAK-54 ARF-QB Assembly Manual page 21

2. Gather the rudder control linkage parts shown
below. 2 Rudder cables, 2 threaded metal RC
links, 4 threaded couplers, and 4 brass swag-
ing tubes.
3. Feed the rudder cable through the cable exit
tube in the tail of the fuse toward the front of
the fuse. Repeat on other side.
4. Insert rudder cable through the brass swage
tube, then through the threaded coupler hole,
and back through the brass swage tube as
shown.
5. Loop the cable back through the brass swage
tube as shown.
21