16.
SEPARATE VANE PUMP ASSY (See page 51–8)
NOTICE:
Do not disconnect the hose.
17.
REMOVE GENERATOR ASSY (See page 19–16)
18.
SEPARATE EXHAUST PIPE ASSY FRONT
(a)
Remove the 2 bolts, 2 compression spring installing the front side of exhaust pipe.
(b)
Remove the gasket.
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
CYLINDER HEAD GASKET
19.
REMOVE
SUB–ASSY RH
(a)
Remove the PS oil pump reservoir and put it aside.
(b)
Place a wooden block between the jack and engine, and
set the jack, then remove the 4 bolts, the 2 nuts and en-
gine mounting insulator RH.
A01045
A64005
20.
DISCONNECT ENGINE WIRE
(a)
Remove the 5 clamps from the 5 clamp brackets.
(b)
Disconnect the 4 ignition coil connectors.
A64021
(c)
Remove the bolt and nut installing the engine wire.
A64022
ENGINE
MOUNTING
14–113
INSULATOR