14–122
Yellow Color Mark
Timing Mark
57.
INSTALL CHAIN VIBRATION DAMPER NO.1
(a)
Install the chain vibration damper with the 2 bolts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
58.
INSTALL CHAIN TENSIONER SLIPPER
(a)
Install the chain tensioner slipper with the bolt.
Torque: 19 N⋅m (194 kgf⋅cm, 14 ft⋅lbf)
SST
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
CYLINDER HEAD GASKET
(d)
Install the timing chain on the camshaft timing sprockets
with the yellow color links aligned with the timing marks on
the camshaft timing sprockets.
A62173
59.
INSTALL CRANKSHAFT POSITION SENSOR PLATE
NO.1
(a)
Install the plate with the "F" mark facing forward.
A30867
60.
INSTALL TIMING GEAR COVER OIL SEAL
(a)
Apply MP grease to a new oil seal lip.
(b)
Using SST, tap in the oil seal until its surface is flush with
the timing chain cover edge.
SST
NOTICE:
Keep the lip off foreign materials.
A62174
09223–22010