Advertisement
14–112
REPLACEMENT
1.
WORK FOR PREVENTING GASOLINE FROM SPILLING OUT (See page 11–1)
2.
REMOVE ENGINE UNDER COVER RH
3.
DRAIN COOLANT (See page 16–7)
4.
REMOVE FRONT WHEEL RH
6.
REMOVE AIR CLEANER HOSE NO.1
(a)
Loosen the 2 air cleaner hose clamp bolts, and remove the air cleaner hose.
7.
SEPARATE ACCELERATOR CONTROL CABLE ASSY
(a)
Loosen the nut, and remove the accelerator control cable from the accelerator control cable bracket.
8.
DISCONNECT WATER BY–PASS HOSE
(a)
Disconnect the water by–pass hose from the throttle body.
9.
DISCONNECT WATER BY–PASS HOSE NO.2
(a)
Disconnect the water by–pass hose from the throttle body.
10.
REMOVE EFI FUEL PIPE CLAMP (See page 11–10)
11.
DISCONNECT FUEL TUBE SUB–ASSY (See page 11–10)
SST
09268–21010
12.
DISCONNECT UNION TO CONNECTOR TUBE HOSE
(a)
Disconnect the union to connector tube hose from the hose to hose tube.
13.
DISCONNECT RADIATOR HOSE INLET
(a)
Disconnect radiator hose inlet from the cylinder head.
14.
DISCONNECT HEATER INLET WATER HOSE
(a)
Disconnect the heater inlet water hose from the cylinder head.
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
CYLINDER HEAD GASKET
5.
REMOVE CYLINDER HEAD COVER NO.2
(a)
Remove the 2 nuts, 2 clips and cylinder head cover.
A65077
15.
REMOVE FAN AND GENERATOR V BELT
(a)
Turn the V–ribbed belt tensioner slowly clockwise and
loosen it. Then, remove the fan and generator V belt and
put back the V–ribbed belt tensioner little by little and fix
it quietly.
A60622
140OL–01
Advertisement
