96.
INSTALL FUEL DELIVERY PIPE SUB–ASSY(See page 11–10)
98.
INSTALL GENERATOR ASSY (See page 19–16)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (April, 2003)
94.
INSTALL OIL LEVEL GAGE GUIDE
(a)
Apply a light coat of a new O–ring, then install it to the oil
level gage guide.
(b)
Install the oil level gage guide with the bolt.
Torque: 13 N⋅m (133 kgf⋅cm, 10 ft⋅lbf)
A64026
95.
INSTALL INTAKE MANIFOLD
(a)
Install a new gasket to the intake manifold.
(b)
Install the intake manifold and throttle body assembly with
the 2 brackets, 4 bolts and 2 nuts. Uniformly tighten the
bolts and nuts in several passes.
Torque: 30 N⋅m (306 kgf⋅cm, 22 ft⋅lbf)
(c)
Connect the 2 vacuum hoses to the intake manifold.
(d)
Connect the 2 water hoses to the throttle body.
A14660
97.
INSTALL IGNITION COIL ASSY
(a)
Install the 4 ignition coils with the 4 bolts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
A64023
(b)
Install the engine wire with the bolt and nut.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
A64022
14–39