Download Print this page

Notational Conventions; Important Notes; Safety Notes - Fujitsu A17-3 Operating Manual

Hide thumbs


FUJITSU A17-3/A19-3

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:
Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, destroys the device, or may lead to loss of data.
Supplementary information, remarks, and tips follow this symbol.
Text which follows this symbol describes activities that must be performed in the order shown.
"Quotation marks" indicate names of chapters or terms.
This font indicates filenames and menu items.
This font indicates screen outputs.

Important notes

In this chapter you will find information regarding safety which is essential to take note of
with your monitor.

Safety notes

This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales outlet or our Service desk.
The display surface of the LCD monitor is sensitive to pressure and scratches. You should
therefore be careful with the display surface so as to avoid lasting damage (scratches).
If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.
During installing and operating the device, please observe the instructions on environmental
conditions in the "Technical data" chapter as well as the instructions in the "Installing an
ergonomic video workstation" chapter.
To ensure sufficient ventilation, the intake and exhaust air openings of the monitor must never
be blocked.
The monitor automatically sets itself to a mains voltage in the range of 100 V to 240 V. Ensure
that the local mains voltage lies within these limits.
Ensure that the power socket on the device or the grounded mains outlet is freely accessible.
The ON/OFF switch does not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the socket.
The monitor is equipped with a power cable that complies with safety standards.
Lay all cables so that nobody can stand on them or trip over them. When attaching the device,
observe the relevant notes in the "Connecting the monitor" chapter.
No data transfer cables should be connected or disconnected during a thunderstorm.
Downloaded from Manuals
Fujitsu Technology Solutions



  Also See for Fujitsu A17-3

  Related Manuals for Fujitsu A17-3

This manual is also suitable for: