Download Print this page

Changing The Monitor Settings - Fujitsu A17-3 Operating Manual

Hide thumbs


FUJITSU A17-3/A19-3

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs.
Choosing basic monitor settings using the supplied software
If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000,
Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be
set with the CD supplied (WHQL for XP and Vista).
Insert the supplied CD into the CD-ROM drive.
Open the Readme file on the CD and follow the instructions in the file.
Your monitor should now already be properly adjusted. If none of the above operating systems is
used or minor corrections are to be made to the screen display, then change the monitor settings
with the OSD menu.
Changing the monitor settings with the buttons of the control panel
1 =
Buttons for the OSD menu
Use the buttons of the control panel to make the following monitor settings directly while the OSD
menu is switched off.
Performing auto-adjustment of the monitor
Press the AUTO button for approx. 1 second while the OSD menu is switched off.
The Auto Processing message is displayed.
Picture quality and position are set to optimum values for your system.
Brightness adjustment
Press the
The adjustment changes the background illumination.
Activating/deactivating muting
Press the
button to switch the sound off and on again.
A message is displayed that the action has been performed.
Downloaded from Manuals
2 =
3 =
button to adjust the brightness.
Power indicator
ON/OFF switch
Fujitsu Technology Solutions



  Also See for Fujitsu A17-3

  Related Manuals for Fujitsu A17-3

This manual is also suitable for: