Notes Regarding The Din En Iso 13406-2 Standard - Fujitsu A17-3 Operating Manual

Having this problem?
Picture is wrongly adjusted
Picture disturbances (vertical lines)
Picture disturbances (horizontal lines,
picture noise)
The screen becomes darker

Notes regarding the DIN EN ISO 13406-2 standard

Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum
permitted number of pixels faults is stipulated in the stringent international standard ISO 13406-2
(Class II).
Example: A 17"/19" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720
pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 4 million dots
in total. In accordance with ISO 13406-2 (Class II), a maximum of 6 pixels and also 7 subpixels may
be faulty.
Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Check the following points:
► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
► Set the contrast and brightness correctly using the
OSD menu if the auto-adjustment function does
not give satisfactory results.
FUJITSU A17-3/A19-3
23