Connecting The Device; Connecting Cables To The Monitor - Fujitsu A17-5 ECO Operating Manual

Connecting the device

Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.

Connecting cables to the monitor

The data cable supplied has two 15-pin D-SUB connectors for connection
to the monitor and to the computer.
Information on the computer connections and interfaces can be found in the
operating manual for the computer.
2
► Select the data cable that is appropriate for your computer.
► Connect one of the data cable connectors to the D-SUB connector on the monitor and
secure the plug-in connection by tightening the safety screws.
► Insert one plug on the audio cable into the AUDIO IN socket on the monitor,
making sure it is properly engaged.
► Plug the supplied power cable into the power connector on the monitor.
A lock (Kensington Lock) can be fitted in the security slot to protect the monitor
against theft. A Kensington Lock is not included with the monitor at delivery.
A26361-K1338-Z220-1-7619, edition 1
Downloaded from ManualMonitor.com Manuals
5
5
4 3
1
"Important notes", Page
3
1 = Security slot for the "Kensington Lock"
2 = Power connection socket
3 = D-SUB connection socket (analogue)
4 = AUDIO IN socket
5 = Holes for securing the swivel arm or wall
mounting
Getting started
3.
4 2
11