Displaying Information - Fujitsu A17-5 ECO Operating Manual

Operation
Configuring function settings in the Advanced menu
DDC/CI
Resolution Notifier
Factory Recall

Displaying information

20
Downloaded from ManualMonitor.com Manuals
Open the Advanced settings window
Activate/deactivate the DDC/CI function
On = The DDC/CI function is activated (standard setting)
Off = The DDC/CI function is deactivated
Monitor information. The optimum resolution for this monitor is 1280 x 1024
pixels.
When the function is active (On), a message will appear on the monitor after
approx. 30 seconds if a different resolution is set.
Change the resolution to 1280 x 1024 to achieve optimum picture quality.
When the function is deactivated (Off), no messages will appear.
Activate the factory settings
This function is used to reset all settings to the factory settings. The user is
not prompted to confirm the changes.
Press the SELECT/MENU
Processing message will be displayed.
Call the Information setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal and polarity of the synchronisation signal are
displayed.
button to activate the function. The Auto
A26361-K1338-Z220-1-7619, edition 1