Getting Started; About The Remote Control - Motorola DCT 2000 Owner's Manual

Digital cable receiver

Hide thumbs Also See for DCT 2000:

Table of Contents

Getting Started

This section describes how to use the remote control to turn on the TV,

receiver and VCR, as well as display and use the channel banner and

Program Guide.

Your Cox Digital Cable smart remote allows you to control not only your

receiver, but also your TV, VCR and audio component. For information

on programming your remote, please refer to the user manual that you

received with your remote. Simply press the button on your remote for the

component you want to use, then whatever function keys you desire. The

remote will "remember" which component you want to operate until you

tell it differently.

For example, if you want to turn the VCR on and play a tape, simply press

the VCR button on the remote, then the power button, then use the remote

keys to control the VCR. (Remember that many of the VCR function keys—

like Play, Stop, Rewind—may be hidden under a sliding compartment in

some models.) When you're done using the VCR and want to return to

watching Cox Digital Cable, simply press the CABLE button on the remote

and return to normal use. (Always remember to point the remote at the

receiver if you are using it to control Cox Digital Cable.)

Your remote may vary slightly, but basic functionality is the same. See the

following remote control diagrams on page 10 to reference the remote

model that you have.

Table of Contents