Make sure you thoroughly wipe the
gray area on the inside cover. Wash
both sides of test strip holder base;
carefully clean around the hole. Dry
the test strip holder completely with
a soft cloth or lint-free tissue.
Top of
Cover
Base
Gray Area Hole (clean both sides)
Inside Cover
Step 3: Clean the Lens Area and
Contact Points.
Use a cotton swab or a soft cloth
dampened with water to wipe the
lens area and contact points. Be
careful not to scratch the lens area.
Dry with a soft cloth or tissue that
Bottom
of Base
does not contain lint, lotion, or per-
fume. Do not use abrasive materials
such as paper towels.
Base
47
Contact Points
Lens Area