Lifescan SureStep blood glucose monitoring system Owner's Booklet page 31

Step 4: Remove the Lancet.
When removing the PENLET
Cap, be careful not to prick your-
self or anyone else. After removing
the cap, grasp the two dark gray
prongs located near the release
button, pointing
the lancet down
and away from
you. Pull back
on the dark
gray sliding
barrel until the
lancet drops
out. Another
way to remove
the lancet is
to put the
protective disk back on the lancet.
Place the disk on a hard surface
II
®
and gently stick the lancet needle
into the protective disk.
Now carefully pull the lancet out.
Discard the used lancet in a con-
tainer for sharp objects.
23