Lifescan SureStep blood glucose monitoring system Owner's Booklet page 37

If any white patches or white streaks
appear on the confirmation dot,
you have not applied enough blood
for an accurate test. You must start
the test over with a new test strip.
Not Enough Blood
Caution: If you do not insert the
test strip properly, you may get
an inaccurate result.
Step 3: Insert the Test Strip and
Read Result.
Turn the SURESTEP
the front side and slide it into the
test strip holder, pink side up. Push
the test strip in firmly until it stops.
Insert the test strip within two
minutes after applying blood to
obtain an accurate result.
29
Test Strip to
®