Three Easy Steps To Coding - Lifescan SureStep blood glucose monitoring system Owner's Booklet

Code numbers are used to calibrate
the SURESTEP
®
the SURESTEP
®
results. You must code the meter
before using it for the first time. You
must check the code every time you
change to another package of test
strips. Check that the code number
on the display matches the code
number on the test strip package.
Caution: If the code numbers do
not match, you may get inaccurate
results.
C O D I N G T H E M E T E R
Test Strip with
Meter for accurate

Three Easy Steps to Coding

Step 1: Turn on the Meter.
Press the blue power button. The
result from your last blood glucose
or control solution test will appear.
Next, the meter code will appear
for a few seconds.
10
(Example)
(Example)