Operation; Switching The Device On And Off - Fujitsu SCALEOVIEW Q26W-1 Operating Manual

Operation

Operation

Switching the device on and off

The ON/OFF switch (2) on the front of the monitor is used for switching the monitor on and off.
Press the buttons from the bottom up.
The colour of the LED indicator changes as follows:
LED indicator
blue
orange
does not light up
1 = Power indicator
► Switch the device on with the ON/OFF switch (2).
Only switch the computer on once you have switched the monitor on.
16
Downloaded from ManualMonitor.com Manuals
Status
Monitor and computer are switched on.
Monitor is not receiving a video signal or is in power saving mode.
Monitor is switched off.
1 2
2 = ON/OFF switch
A26361-K1214-Z120-1-7619, edition 1