Osd Menu Functions; Adjusting The Brightness And Contrast - Fujitsu SCALEOVIEW Q26W-1 Operating Manual

Possible combinations of signal sources
Depending on which source the signal for the main display comes from, you can
use certain sources for the signal of the PIP display.
Signal
sources Main display
PIP display
CVBS
SV
YPbPr
VGA
DVI/HDMI
Further information about the PIP menu can be found in
in the "PIP" menu", Page 25

OSD menu functions

The OSD menu for analog monitor operation is described below. During
digital operation some functions are not available, as they are not required
due to the digital transmission technology used.

Adjusting the brightness and contrast

Brightness
Contrast
Black level
Auto level
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
A26361-K1214-Z120-1-7619, edition 1
Downloaded from ManualMonitor.com Manuals
CVBS
+
+
+
Call up the Brightness/Contrast setting window
Set the brightness of the display
With this function you change the brightness of the background lighting.
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the
SV YPbPr
+
+
+
+
+
SELECT / MENU
Operation
VGA DVI/
HDMI
+ +
+ +
"Functions
button.
23