Connecting The Device - Fujitsu SCALEOVIEW Q26W-1 Operating Manual

Getting started
3
For instructions on how to mount the swivel arm or wall bracket, please see
the documentation for the swivel arm or wall bracket.

Connecting the device

Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.
12
Downloaded from ManualMonitor.com Manuals
3
► To remove the monitor base, undo the
screws on the monitor base (3).
You can now mount a swivel arm or a wall
bracket in accordance with VESA FPMPMI
using a hole spacing of 100 mm.
"Important notes", Page
A26361-K1214-Z120-1-7619, edition 1
3.